Steel Hex Nut, M3-0.5 Threads, Made in US Pack of 100

Drive system is a hexagon-shaped head. Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. The first two digits indicate the primary materials used to form the steel. The steel used in these fasteners has a tensile strength ranging from 100, 000 to 150, 000 psi pounds per square inch.

A threaded fastener's size name includes information about the major external diameter in millimeters, followed by the thread pitch millimeters per thread, which indicates if it is coarse or fine. Ensure a lasting hold for any project. The last 2 digits identify the percentage of carbon for the alloy in hundredths.

Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. Hex nuts have flat tops with chamfered corners; bottoms may be flat or chamfered. Hex drive systems are driven with a wrench.

Steels are designated by a 4 number SAE Steel grade. Plain steel fasteners are suitable where strength and value are the primary considerations. Most often used on machine screws and threaded rod, these general purpose nuts are for low-strength assemblies. Hex nuts are appropriate for use in low-strength assemblies.



StarTech.com PC Mounting Computer Screws M3 x 1/4in Long Standoff - 50 Pack

Works with most standard desktop computer cases. This pack of 50 m3 x 1/4in computer screws are great to have on handy for building, and maintaining computer systems, repairing, for mounting any motherboard to your PC chassis or attaching any floppy/CD-ROM/DVD-ROM drives. 025in length. Keep stocked with M3 computer case screws for hardware installations.

M3 screws / motherboard mount screws / chassis screws / computer repair screws / computer case screws / computer screws / 50 x m3 / floppy/CD-ROM/DVD-ROM drive screws. M3 thread type.


Similar products

Uxcell a14040700ux0339 PC PCB Motherboard Brass Standoff Hexagonal Spacer M3 9+4mm (Pack of 50)
Maxmoral 200pcs Toothed Hex 6/32 SCREW 6 - 32 Computer PC Case Hard Drive Motherboard Mounting Screws.
SoundOriginal Computer Case LED Light ATX Power Supply Reset HDD Switch Cable 68cm 26.77inch Long Red Green ATX Case Front Bezel Wire Kit
Uxcell a12092200ux0090 50 Pcs Brass Screw Thread PCB Stand-off Spacer M3 Male x M3 Female 6mm (Pack of 50)
uxcell 50 Pcs M3 Male x M3 Female Hex Head PCB Standoffs Spacers 12mm Length
100Pcs M3 3mm Female Thread Hex Metal Nut Fastener Silver Tone
Uxcell a12092200ux0096 Screw PCB Stand-off Spacer Hex M3 Male x M3 Female 15mm Length (Pack of 50)
Maxmoral 100pcs Toothed Hex 6/32 SCREW 6 - 32 Computer PC Case Hard Drive Motherboard Mounting Screws.
Intel BX80677G3930 7th Gen Celeron Desktop Processors
uxcell 20 Pcs PC PCB Motherboard Brass Standoff Hexagonal Spacer M3 6+4mm


Class 4.8 Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, Meets DIN 965, 12mm Length, M3-0.5 Metric Coarse Threads Pack of 100

The flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped threaded holes. Works with most standard desktop computer cases. The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

025in length. Zinc plating resists corrosion resistance and has a reflective appearance. The zinc plating offers corrosion resistance and a reflective appearance. Meets din 965 specifications. Keep stocked with M3 computer case screws for hardware installations. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Class 4. 8 steel, composed of either low or medium carbon steel, is often used in applications where toughness is the primary consideration.

Class 4.


Similar products

Steel Hex Nut, M3-0.5 Threads, Made in US (Pack of 100)


Steel Lock Nut, Plain Finish, Gray Pack of 100

Works with most standard desktop computer cases. Zinc plating resists corrosion resistance and has a reflective appearance. Plain steel fasteners are suitable where strength and value are the primary considerations. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

Drive system is a hexagon-shaped head. Hex drive systems are driven with a wrench. Steels are designated by a 4 number SAE Steel grade. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. The first two digits indicate the primary materials used to form the steel. Class 4. 8 steel is often used in applications where toughness is the primary consideration. Lock nuts are commonly used when spinning of components would be a problem.

They are designed to interlock with the locking surface for a secure hold, without slippage. M3 screws / computer screws / motherboard mount screws / computer case screws / chassis screws / computer repair screws / 50 x m3 / floppy/CD-ROM/DVD-ROM drive screws.


Similar products

uxcell M3x6mmx0.5mm Stainless Steel Round Flat Washer for Bolt Screw 100Pcs
100Pcs M3 3mm Female Thread Hex Metal Nut Fastener Silver Tone
M3 Stainless Steel Hex Socket Head Cap Screws Nuts Assortment Kit, Allen Wrench Drive, Precise Metric Bolts and Nuts Set with Beautiful Assortment Tool Box for 3D Printed Project, 310 Pcs (Silver)
SoundOriginal 2pcs Cooling Blower Fan DC 12V 0.06A~0.15A 50mmx15mm Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement
AmazonBasics PETG 3D Printer Filament, 1.75mm, Black, 1 kg Spool
URBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14
TOPINSTOCK 20x20 European Aluminum Extrusions Slim T-Nut M5 Thread Pack of 100
iExcell 250 Pcs M3 x 6mm/8mm/10mm/12mm/16mm 10.9 Grade Alloy Steel Hex Socket Button Head Cap Screws Kit, Black Oxide Finish
BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
Shapenty 100PCS 3mm Small Stainless Steel Female Thread Hex Screw Nut Fastener Tool, M3


Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs

Plain steel fasteners are suitable where strength and value are the primary considerations. Lock nuts ensure a secure hold; reduce slippage. 1 bag of approximately 100 m3 stainless steel square head bolts 12mm designed for MakerBeam 10x10mm in diameter. 1 bag of approximately 25 M3 stainless steel square head bolts 25mm.

Makerbeam enables professional prototyping and provides mechanics for any electronics project. Keep stocked with M3 computer case screws for hardware installations. 025in length. Application: scientific, displays/exhibits, robotics, home technical projects, electronics, laboratories, etc. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

Drive system is a hexagon-shaped head. Works with most standard desktop computer cases. Class 4. 8 steel is often used in applications where toughness is the primary consideration. Contents: bag of approximately 100 M3 square head bolts 12mm. 1 bag of approximately 25 m3 stainless steel square head bolts 25mm Can be used for MakerBeam, MakerBeam XL and OpenBeam profiles both use M3 size bolts.

Makerbeam m3 square head bolts attach beams to other MakerBeam elements such as brackets and bearings.


Similar products

MakerBeam 25 pieces T-slot nuts inc screws
MakerBeam Corner Cube Black 12 pcs
Makerbeam Openbeam T Bracket (Pack of 12pcs)
MakerBeam Regular Starter Kit Black anodized including beams (10x10mm in diameter), brackets, nuts and bolts
MakerBeam Corner brackets (pack of 12)
MakerBeam M3 bolts with square head, 6mm (pack of 250) designed for MakerBeam (10x10mm in diameter).
Makerbeam Openbeam Right Angle Bracket (Pack of 12pcs) designed for MakerBeam (10x10mm in diameter).
MakerBeam Vinyl End Caps, Black (Pack of 8)
MakerBeam 200x10x10mm beam black anodised (pack of 8)
Makerbeam Corner Cube Clear (10x10x10mm) 12pcs


MakerBeam 25 pieces T-slot nuts inc screws

Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. 1 bag of approximately 100 m3 stainless steel square head bolts 12mm designed for MakerBeam 10x10mm in diameter. 1 bag of approximately 25 M3 stainless steel square head bolts 25mm. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

T-slot nut is great to fasten brackets or corner cubes. The t-slot nut is great to fasten brackets or corner cubes. Meets din 965 specifications. Do note that because of the 4mm thread the load bearing capacity of structures will be limited. The first type is a button head socket screw ISO7380, 4mm, M3, A2 and is meant to be used with brackets.

With hex hole for easy use with hex nut driver. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Plain steel fasteners are suitable where strength and value are the primary considerations. Ensure a lasting hold for any project. All makerbeam elements can be combined and reused no welding required enabling shorter design and assembly times.

M3 screws / chassis screws / computer repair screws / computer case screws / motherboard mount screws / computer screws / 50 x m3 / floppy/CD-ROM/DVD-ROM drive screws.


Similar products

MakerBeam Corner Cube Black 12 pcs
MakerBeam Regular Starter Kit Black anodized including beams (10x10mm in diameter), brackets, nuts and bolts
Makerbeam Corner Cube Clear (10x10x10mm) 12pcs
MakerBeam Corner brackets (pack of 12)
Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs
Makerbeam Openbeam T Bracket (Pack of 12pcs)
MakerBeam 600x10x10mm beam black anodised (pack of 2)
Makerbeam Openbeam Right Angle Bracket (Pack of 12pcs) designed for MakerBeam (10x10mm in diameter).
MakerBeam 200x10x10mm beam black anodised (pack of 8)
MakerBeam Regular Starter Kit Clear anodized including beams, brackets, nuts and bolts


uxcell M3x6mmx0.5mm Stainless Steel Round Flat Washer for Bolt Screw 100Pcs

Plain steel fasteners are suitable where strength and value are the primary considerations. Class 4. 8 steel is often used in applications where toughness is the primary consideration. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Ensure a lasting hold for any project.

All makerbeam elements can be combined and reused no welding required enabling shorter design and assembly times. Zinc plating resists corrosion resistance and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Drive system is a hexagon-shaped head.

Lock nuts ensure a secure hold; reduce slippage. Product name: flat Washer; Material: Stainless Steel. There are special t-slot nuts for MakerBeam XL 15x15mm available. Comes with two types of bolts. Corrosion Resistant w/ Reduce Galling. Makerbeam enables professional prototyping and provides mechanics for any electronics project.

Not compatible with MakerBeam XL 15x15mm in diameter. With hex hole for easy use with hex nut driver.


Similar products

Hammer Drop-In M5 T Nut for 20mm T-Slot/V-Slot Aluminum Extrusions (Pack of 100)
iExcell 100 Pcs M5 x 10 mm 10.9 Grade Alloy Steel Internal Hex Drive Button Head Cap Screws, Black Oxide Finish
10 Pcs 21mm x 12mm Conical Recessed Rubber Feet Bumpers Pads Black
Shapenty 100PCS 3mm Small Stainless Steel Female Thread Hex Screw Nut Fastener Tool, M3
100Pcs M3 3mm Female Thread Hex Metal Nut Fastener Silver Tone
M3 Stainless Steel Hex Socket Head Cap Screws Nuts Assortment Kit, Allen Wrench Drive, Precise Metric Bolts and Nuts Set with Beautiful Assortment Tool Box for 3D Printed Project, 310 Pcs (Silver)
Uxcell a15072100ux0300 M3x0.5mm Zinc Plated Self-Locking Nylon Insert Hex Lock Nuts 50pcs (Pack of 50)
M5X16 SHCS (10 Units Socket Head Cap Screw)
iExcell 125 Pcs M3 x 20mm/25mm/30mm/35mm Stainless Steel 304 Internal Hex Drives Socket Cap Head Cap Screws and Nuts Kit
M5 x 10mm 12.9 Alloy Steel Hex Socket Head Cap Screws Bolt Black 50pcs


MakerBeam M3 bolts with square head, 6mm pack of 250 designed for MakerBeam 10x10mm in diameter.

There are no fixed positions for mounting giving you the freedom to build your own design easily. Plain steel fasteners are suitable where strength and value are the primary considerations. MakerBeam. Eu is a versatile and lightweight structural system T-slot with components that give endless building possibilities in desktop size.

Keep stocked with M3 computer case screws for hardware installations. T-slot nut is great to fasten brackets or corner cubes. Contents: bag of approximately 250 M3 square head bolts 6mm. Can be used for makerBeam and OpenBeam profiles both use M3 size bolts. Main color: silver tone; Inner Dia: 3mm/012". Class 4.

8 steel is often used in applications where toughness is the primary consideration. Makerbeam enables professional prototyping and provides mechanics for any electronics project. 025in length. Designed for MakerBeam 10x10mm in diameter. Weight: 20g; package content: 100+/-2% x Flat Washer.


Similar products

MakerBeam 25 pieces T-slot nuts inc screws
Makerbeam Openbeam Right Angle Bracket (Pack of 12pcs) designed for MakerBeam (10x10mm in diameter).
MakerBeam Corner Cube Black 12 pcs
MakerBeam Corner brackets (pack of 12)
Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs
Makerbeam Openbeam T Bracket (Pack of 12pcs)
MakerBeam 200x10x10mm beam black anodised (pack of 8)
100Pcs M3 3mm Female Thread Hex Metal Nut Fastener Silver Tone
MakerBeam 100x10x10mm beam, black anodised (pack of 16)
Makerbeam Corner Cube Clear (10x10x10mm) 12pcs


AmazonBasics PETG 3D Printer Filament, 1.75mm, Blue, 1 kg Spool

Engineered to reduce jamming; resealable storage bag included to protect filament between use. Works with most standard desktop computer cases. Not compatible with MakerBeam XL 15x15mm in diameter. Zinc plating resists corrosion resistance and has a reflective appearance. With hex hole for easy use with hex nut driver.

Makerbeam enables professional prototyping and provides mechanics for any electronics project. Thickness: 05mm/002". 3d printer filament with 1. 75 mm diameter + / -. 05 mm; designed to fit most common 3D printers check spool size for compatibility; Blue; 1 kg spool. There are special t-slot nuts for MakerBeam XL 15x15mm available.

Comes with two types of bolts. Lock nuts ensure a secure hold; reduce slippage. 1 bag of approximately 250 m3 stainless steel square head bolts 6mm designed for MakerBeam 10x10mm in diameter. With hex hole for easy use with hex nut driver. Meets din 965 specifications. Weight: 20g; package content: 100+/-2% x Flat Washer.




Similar products

AmazonBasics PLA 3D Printer Filament, 1.75mm, Black, 1 kg Spool
AmazonBasics PETG 3D Printer Filament, 1.75mm, Green, 1 kg Spool
AmazonBasics TPU 3D Printer Filament, 1.75mm, Black, 1 kg Spool
HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange
Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
AmazonBasics Premium PLA 3D Printer Filament, 1.75mm, Gray, 1 kg Spool
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)
HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, White
SIQUK 22 Pieces 3D Printer Nozzles MK8 Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Extruder Print Head with Free Storage Box for 3D Printer Makerbot Creality CR-10


MakerBeam M3 bolts with wing type head, 6mm pack of 100 designed for MakerBeam 10x10mm in diameter.

Thickness: 05mm/002". Outer dia: 6mm/024". Weight: 20g; package content: 100+/-2% x Flat Washer. All makerbeam elements can be combined and reused no welding required enabling shorter design and assembly times. Can be used for makerBeam and OpenBeam profiles both use M3 size bolts. 3d printer filament with 1. 75 mm diameter + / -.

05 mm; designed to fit most common 3D printers check spool size for compatibility; Blue; 1 kg spool. Made of petg plastic, stiffness, known for its ease of use like PLA and durable strength like ABS; no heating bed needed; offers easy bed adhesion, and a glossy type finish. Spool's built-in gauge shows percentage of material remaining and approximate length remaining.

Wing type bolts enable additional bolts to be attached to a beam after beam ends have been closed off. There are special t-slot nuts for MakerBeam XL 15x15mm available. Comes with two types of bolts. Application: scientific, electronics, displays/exhibits, robotics, home technical projects, laboratories, etc.

Engineered to reduce jamming; resealable storage bag included to protect filament between use. Not compatible with MakerBeam XL 15x15mm in diameter. Lock nuts ensure a secure hold; reduce slippage.


Similar products

MakerBeam 25 pieces T-slot nuts inc screws
MakerBeam Corner brackets (pack of 12)
Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs
MakerBeam Corner Cube Black 12 pcs
MakerBeam M3 bolts with square head, 6mm (pack of 250) designed for MakerBeam (10x10mm in diameter).
Makerbeam Openbeam T Bracket (Pack of 12pcs)
MakerBeam Regular Starter Kit Black anodized including beams (10x10mm in diameter), brackets, nuts and bolts
MakerBeam 200x10x10mm beam black anodised (pack of 8)
Makerbeam Openbeam Right Angle Bracket (Pack of 12pcs) designed for MakerBeam (10x10mm in diameter).
100Pcs M3 3mm Female Thread Hex Metal Nut Fastener Silver Tone


MakerBeam Corner brackets pack of 12

Engineered to reduce jamming; resealable storage bag included to protect filament between use. Meets din 965 specifications. Measures 9. 2 by 8. 3 by 3 inches lxwxh; weighs 2. 2 pounds; backed by an AmazonBasics 1-year limited warranty. All makerbeam elements can be combined and reused no welding required enabling shorter design and assembly times.

Not compatible with MakerBeam XL 15x15mm in diameter. T-slot nut is great to fasten brackets or corner cubes. Keep stocked with M3 computer case screws for hardware installations. Zinc plating resists corrosion resistance and has a reflective appearance. Each makerbeam bracket is conveniently engraved with its angular measurement.

Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Designed for MakerBeam 10x10mm in diameter. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Corner brackets strengthen your makerbeam design.

1 bag of approximately 250 m3 stainless steel square head bolts 6mm designed for MakerBeam 10x10mm in diameter. With hex hole for easy use with hex nut driver.


Similar products

MakerBeam 25 pieces T-slot nuts inc screws
MakerBeam Corner Cube Black 12 pcs
Makerbeam Openbeam T Bracket (Pack of 12pcs)
Makerbeam XL Corner Cube Black (15x15x15mm) 12pcs
Makerbeam Openbeam Right Angle Bracket (Pack of 12pcs) designed for MakerBeam (10x10mm in diameter).
Makerbeam M3 Bolts with Square Head, 12mm 100 pcs and 25mm 25pcs
MakerBeam M3 bolts with square head, 6mm (pack of 250) designed for MakerBeam (10x10mm in diameter).
MakerBeam XL Regular Starter Kit black anodized including beams, brackets, nuts and bolts
100Pcs M3 3mm Female Thread Hex Metal Nut Fastener Silver Tone
MakerBeam Regular Starter Kit Black anodized including beams (10x10mm in diameter), brackets, nuts and bolts